The Bravo is a 24 Bit / 96 kHz digital processor with ultra low jitter and extreme low noise performance for truly remarkable audio quality from USB.

• Use the Bravo to convert the USB signal from your computer to an Audiophile Grade S/PDIF output. 
• Connect between your CD transport and DAC or your DVD player and receiver to reduce noise and digital distortion for improved audio quality.

• Includes inputs for USB, Digital Coax and Toslink Optical and outputs to Digital Coax and Toslink Optical
  
• Ultra low Jitter
  
• Isolates noise and digital distortion to enhance audio performance.
  

How to use the Bravo?

The Bravo is super easy to setup and use. No additional software or drivers required.

To use the Bravo as a USB to S/PDIF converter you simply connect the USB cable from any available USB port on your computer to the USB input of the Bravo. Then connect either the Digital Coax or Toslink optical output to your external DAC or AV Receiver. Sit back and enjoy.

The Bravo also serves as a 24 Bit / 96 kHz digital processor. The Bravo is effective at dramatically reducing digital noise and distortion. Connect any Digital Coax or Toslink Optical input and then output to either Digital Coax or Toslink Optical. The resulting output signal is significantly cleaner than the input.

Specifications:

Circuit Structure: Full support to 24 Bit - 96 kHz digital signal
Power Structure: Switching DC-DC regulator, soft start circuit
Input Support: USB  - 16 Bit / 32 kHz / 44.1 kHz / 48 kHz / 96 kHz
                                          24 Bit / 44.1 / 48 kHz / 96 kHz

                             Coaxial / Optical - 16 Bit / 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz
                                                              24 Bit / 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz

Output Support: Coaxial / Optical - 16 Bit / 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz
                                                                24 Bit / 32 kHz / 44.1 kHz / 48 kHz / 88.2 kHz / 96 kHz

Input Select: Auto Select, USB is highest priority
Reclock: includes Fi-reclock technology to reduce jitter
Circuit Protection: Over current protection
USB Chip: TENOR TE0722
Receiver Chip: Texas Instruments DIR9001
Transmitter Chip: Wolfson WM8804

Connectivity:
USB interface (USB 1.1)
Digital Input: 1 x Digital Coax, 1 x Toslink Optical
Digital Output: 1 x Digital Coax, 1 x Toslink Optical

System Requirements:
All components with a digital coax or Toslink optical output. Max support to 24 Bit / 96 kHz

Minimum Computer requirements:
Intel Pentium 2, Celeron 800
Microsoft Windows 2000 (Service Pack 4) or Windows XP (Service Pack 1)
128 MB RAM
Available USB Port

Package Contents:
Bravo 24 Bit / 96 kHz Digital Processor
Autoswitching Power Supply 100 - 240V input , 24VDC 0.5A output
USB Cable
User Manual
Warranty Card